Baby 6 Engine Kits – M20
325i/e, 528e, 525i ≥’91
2900 Sport/Rally “I” Engine Kit - 205 HP
Item | Price | Core Deposit |
---|---|---|
Head, HiFlo ST Sport | $2,695 | $500 |
Head Gasket, Improved Water Flow | $140 | |
Head Bolt Set, 8mm Allen Head Socket | $140 | |
Pistons, 2900 Sport, 86mm, Hard Anodized Deep Valve Pockets, 10.0:1 CR | $1,650 | |
Rings, Moly 86mm | $240 | |
Rods: not provided, factory 2.5i L rods | Call if you want help | |
Rod Bolt Set | $75 | |
Rod Bearing Set: Coated Tri-Metal | $270 | |
Main Bearing Set: Coated, 360° Oiling Groove | $315 | |
*Requires MM to machine the lock-tang grooves on the Main Bearing Caps | $175 | |
Top End Gasket Set | $100 | |
Bottom End Gasket | $150 | |
Crankshaft, 81mm Stroke ETA Crank | Call |
3000 2926cc Sport/Rally Engine Kit - 225 HP
Item | Price | Core Deposit |
---|---|---|
Head, HiFlo ST Sport | $2,695 | $500 |
Head Gasket, Improved Water Flow | $140 | |
Head Bolt Set, 8mm Allen Head Socket | $140 | |
Pistons, 3200 Sport, 86mm, Hard Anodized 10.0:1 CR | $1,650 | |
Rings, Moly 86mm | $240 | |
Rods, “H” Beam 138mm with 4 Oiling Grooves | $1,290 | |
Rod Bearing Set, Coated Tri-Metal | $270 | |
Main Bearing Set Coated, 360° Oiling Groove | $315 | |
*Requires MM to machine the lock-tang grooves on the Main Bearing Caps | $175 | |
Top End Gasket Set | $100 | |
Bottom End Gasket | $150 | |
Crankshaft* 84mm Stroke | Call | |
*Crank Seal Spacer, Bolt & Washer, required for Crankshaft | $200 | |
*Idler Shaft machined for Crank clearance | $100 | $50 |
Some block clearancing required for the crankshaft. | Call for directions. |
325i/e, 528, 525i ≥’91
3200 Sport/Rally Engine Kit - 230 HP
Item | Price | Core Deposit |
---|---|---|
Head, HiFlo ST Sport | $2,695 | $500 |
Head Gasket, Improved Water Flow | $140 | |
Head Bolt Set, 8mm Allen Head Socket | $140 | |
Pistons, 3200 Sport, 86mm Hard Anodized 10.0:1 CR | $1,650 | |
Rings, Moly 86mm | $240 | |
Rods,“H” Beam, 135mm with 4 Oiling Grooves | $1,290 | |
Rod Bolt Set | $75 | |
Rod Bearing Set, Coated Tri-Metal | $270 | |
Main Bearing Set Coated, 360° Oiling Groove | $315 | |
*Requires MM to machine the lock-tang grooves on the Main Bearing Caps | $175 | |
Top End Gasket Set | $100 | |
Bottom End Gasket | $150 | |
Crankshaft**, 89.6mm Stroke | Call | |
*Crank Seal Spacer, Bolt & Washer, required for Crankshaft | $200 | |
*Idler Shaft machined for Crank clearance | $100 | $50 |
Some block clearancing required for the crankshaft. | Call for directions. |